23.25. hpe-support - HPE Support

The following documentation is for HPE Support (hpe-support) content package at version v4.6.0-beta01.97+g1e33864277dc9bbb839f71f1eff994a0c4f05c23.

23.25.1. Object Specific Documentation

23.25.1.1. params

The content package provides the following params.

23.25.1.1.1. hpe-repo-versions

Depending on your update and audit requirements, you may not want to track the current release of the HPE tooling and firmware update bundles. This param allows you to override the versions of the tooling you are using on a repo by repo basis.

If an enrty is omitted, it will default to ‘current’.

23.25.1.1.2. hpe-system-gen

This tracks the generation of HPE ProLiant gear that the running system is. We do this because HPE organizes their tooling and firmware updates according to the system generation.

Current known generations are:

  • g7
  • gen8
  • gen9
  • gen10

Generation will be determined automatically using the following code:

dmidecode |awk '/Product Name:/ { print tolower($NF); exit }'

23.25.1.1.3. hpe-firmware-token

HPE requires that you have a valid support contract to download firmware updates for their ProLiant servers. This token, which can be generated at https://support.hpe.com/hpsc/swd/entitlement-token-service/generate is required to be able to download updates from the firmware update repositories

23.25.1.1.4. hpe-ilo-unwedge-count

This tracks the number of times the system has needed to unwedge the ilo while configuring the machine.

23.25.1.1.5. hpe-repo-urls

HPE systems require some base tooling to fully enable remote management and low-level hardware management. The repository that this URL points at should provide the HP SUM tooling and the SSA tooling for managing RAID controllers. You can use the usual YUM variables here, along with “$hpe_gen” for generation specific tooling.

23.25.1.2. tasks

The content package provides the following tasks.

23.25.1.2.1. hpe-ilo-reset

HPE iLOs have a tendancy to get stuck, and not function correctly in many situations. If you are having issues configuring the HPE iLO, you may need to run this recovery task to ensure you reset the iLO back to a known good working state.

Note

This workflow RESETS the HPE iLO to the Param specified username and password pair in the “ipmi/username” and “ipmi/password” Params. If no values are specified, the iLO will not add a new user to the iLO.

23.25.1.2.2. hpe-tools-install

Install HPE tooling from appropriate yum repositories